Peregrine Pro HAWK-KITE + 6.25  Metre Telesoping Aluminium Pole Instructions

The Aluminium Pole is 6.25 Metres Tall.

​

1. Pull out each section and give a firm twist to lock in place.

2. Sections can be taped using duct tape or Gorilla tape

3. Goo-Gone may be needed to disassemble

4. Attach the kite line to the split ring at the top of the pole

5. “Walk” pole upright and secure with tape, tie-wraps, hose clamps and/or rope to post or solid upright structure

6. Attach the breast of the kite to the swivel on  the end of line and release to fly

7. Adjust the line as needed by cutting and re-attaching. We use a Palomar knot.

• Double strength line (includied in all Canadian kits) is recommended for use with the aluminum pole

• Do not use kite and pole in winds above 65kph/40mph

• Do not use during electrical storms

• Do not use near overhead wires

• Abide by all local, provincial and federal laws
• Not to be flown within 5km/above 6o' of an airport in Canada

​

Aluminium Poles must be taken down in 65KPH/40MPH Winds. If used in high winds (over 40kph/25mph) the top sections must be taped together so they can not pull apart.